With the development of advanced technology, 100G products is fast growing in 100G market to cater to the demand of a higher bandwidth. How about 100G switches? Recently, FS launches S5850/S8050 series 100G switches including two configurations: S5850-48S2Q4C and S8050-20Q4C, to meet the market demands. The FS S5850-48S2Q4C switch is high performance and cost-effective Ethernet access and aggregation platform to enterprise, data center and metro application. This article aims at providing a detailed information about FS S5850-48S2Q4C 100G switch and its compatible optical modules.
The FS 100G switch S5850-48S2Q4C is designed based on the fourth generation high-end scalable chipset, which supports L2/L3/Data Center/Metro features. In a compact 1 RU form factor, the 100G switches can provide line-rate L2 and L3 switching across up to 48 SFP+ ports or 20 QSFP+ ports, and offer 2× 40GbE QSFP+ or 4×100GbE QSFP28 uplink connections. Compared to other 100G switch products on the market, this 100G switch have the following characteristics:
- Data center lever hardware design.
- Design for traffic visual and trouble-shooting.
- Design for data center applications.
- Focusing on supporting 40G/100G ports with large capacity and high density port.
- Complete system software with comprehensive protocols and applications to facilitate rapid service deployment and management for both traditional L2/L3 networks and Data Center networks.
The FS 100G switch S5850-48S2Q4C supports a full rang of 10, 40 and 100 Gigabit Ethernet connectivity options. Those 10G/40G/100G ports support installation of SFP+, QSFP+ and QSFP28 transceiver modules.
Among all the 10GBASE SFP modules on the market, 10GBASE SR SFP and 10GBASE-LR are warmly welcomed by many Ethernet users right now. The maximum transmission distance of Cisco 10GBASE-SR module can be up to 300 m and 400 m respectively on this switch by using multimode fiber OM3 and OM4. The Cisco 10GBASE-LR module can arrive a link length of 10 km on standard single-mode fiber through this switch. The 10G SFP+ modules here totally conform to the specification of this S5850-48S2Q4C 100G switch. You can select a proper one to connect.
As we can see from the above figure, there are many 40G QSFP+ modules available to this switch. By using Cisco 40GBASE-SR4 QSFP modules, link lengths on this switch can arrive 100 m and 150 m, respectively, on laser-optimized OM3 and OM4 multimode fibers. It primarily enables high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber female connector.
The 100G QSFP28 SR4 is highly favored by many Ethernet users to connect switch. The 100G QSFP28 SR4 offers 4 independent transmit and receive channels, each capable of 25Gb/s operation for an aggregate data rate of 100Gb/s, which can be up to 100 m on this S5850-48S2Q4C 100G switch by using OM4 multimode fiber. It provides increased port density and total system cost savings. An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP28 module receptacle. The compatibility of the above 100G QSFP28 modules are guaranteed, you can rest assured to use them for connecting with this S5850-48S2Q4C 100G switch.
FS S5850-48S2Q4C switch is high performance 100G switch, offering cost-effective solutions for next generation metro, data center and enterprise Ethernet network applications. It supports 10G, 40G and 100G Ethernet network connectivity. If you are looking for 100G switches and its compatible optic modules, FS.COM is an optimal choice.