POE(Power over Ethernet) is ideal for using in smart applications which makes CCTV even more effective and easier to manage. The network can be monitored, controlled, and managed from a smartphone or tablet. With a POE switch such as the Netgear ProSAFE 8 port switch, remote IP surveillance cameras can be controlled and managed no matter where they are located. Facing the selection of 8 port PoE switch, most of people would occur allodoxaphobia. For fixing this hard-decision problem, this article would put emphasis on 8 port PoE switch selection guide and tips.
There is a variety of 8 port PoE switches with different brands. Today, we would take FS.COM 8 port switch as an example to introduce 8 port PoE switches. FS.COM S1130-8T2F managed PoE+ switch comes with 8x 10/100/1000Base-T RJ45 Ethernet ports, 1x console port, and 2x gigabit SFP slots. It can supply power to network equipment such as weather-proof IP cameras with windshield wiper and heater, high-performance AP and IP telephone. This managed PoE+ switch are highly flexible, the transmission distance of the SFP fiber port can be up to 120km, and with high resistance to electromagnetic interference. It also features superior performance in stability, environmental adaptability. FS.COM PoE+ Gigabit switch comes with a one-year limited warranty, including any quality problems during the free maintenance. The detailed specification of FS.COM S1130-8T2F managed PoE+ 8 port switch is shown in the below.
Review the data sheets of the camera’s you have specified on the installation to see if any have higher power requires known as PoE+. If you have 1 or more camera’s requiring PoE+ power you will need to heavily consider this when choosing your switch. (Please note PoE+ switches will happily power standard PoE devices but a standard PoE switch cannot power any PoE+ device, regardless of the amount of wattage unused by the other connected equipment). However some switches are designed to power both PoE and PoE+ devices, please check the specification sheet of that exact switch model to see if this is possible on your selection. If this is the case you will usually find a the switch will handle half the PoE+ devices. An 8 port switch can power 8 standard PoE devices or 4 PoE+ devices.
Make sure when planning your network you do not have cable runs longer than 90 meters. This is particularly important when using PoE due to voltage drop. PoE is particularly hard to measure voltage on so if you break the 90 meter cable rule you could be in for a world of pain if devices do not operate correctly.
There are many 8 port PoE switches of major brands on the market, such as Cisco, Netgear, HP, TP-Link and etc. The 8 port switch price varies in difference brands. But they all controlled in a certain range, it’s around $40~$300. For brand selection of 8 port PoE switch, that depends on your preference. You can check the price discrepancy with major brands in the following table. Notice: All the following prices except FS.COM are from Amazon.
This article mainly introduce FS.COM S1130-8T2F 8 port PoE switch and provide 8 port switch selection guide and tips. How to choose a reliable supplier from so many 8 port switch manufacturers? Before buying 8 port PoE switch, the quality, power requirement, price, cable run length should be considered. As one of well-known 3rd-party optics manufacturers, FS.COM is suggested to be a good choice for 8 port PoE switch.